Data Collection

Right below the Interaction buttons, you'll find a separate bottom panel with the Recording option. Clicking the button opens the Select Recording Type panel.

Select Recording type

In the Select Recording Type panel, two options can be seen:

• Record & Replay

• Data Collection

To proceed with data collection, click on the Data Collection button. This will open the Data Server Collection Panel.

Configuring Data Server Connection

The Data Server Connection Panel requires the following inputs:

1. Device IP – Enter the IP address of the Cortex device where data will be collected (e.g. 192.168.0.16).

2. Port – Specify the port number for the data server connection (default: 9080).

After entering the required details, click on the Connect button. Once the connection is established, the Data Collection Panel will open as below.