AudioKit Addition and Configuration

Guide to add new AudioKit and configure it

Note: Currently only single AudioKit connection at a time is supported

Adding a New AudioKit

1. Open the Configuration tab in the wrist panel.

2. Press the Audio button, which will open the Active Audio panel.

3. Press the New button, which will open the panel with input fields.

4. Input configuration

Element	Meaning
Name	Your descriptive name for AudioKit
IP	IP address of the AudioKit
ROS Port	The ROS port (default 9091)
Port	The data port (default 5555)

1. Press Save which will try to connect to the AudioKit device

Modifying a currently Active AudioKit

1. Open the Configuration tab in the wrist panel.

2. Press on the Audio button.

3. Press on the Configure button

4. Edit the configuration of the AudioKit accordingly.

5. Press Save. This will update the AudioKit, and will update the stored configuration