# Loading AudioKit

### Loading a Previously Saved AudioKit

<figure><img src="https://content.gitbook.com/content/wl8ZyUqSnnErBxmQS2H2/blobs/tFJq5fZLBFOYAiPTazkN/obraz.png" alt="" width="375"><figcaption></figcaption></figure>

1. Open the `Configuration` tab in the wrist panel.
2. Press on the `Audio` button.
3. Press on `Load` button, which will open the panel that will show the saved AudioKits.
4. Press on the configuration you would like to load. This will now become the active AudioKit.

<figure><img src="https://content.gitbook.com/content/wl8ZyUqSnnErBxmQS2H2/blobs/cco6nSTch4L2CVKQQK70/obraz.png" alt="" width="375"><figcaption></figcaption></figure>