Configuration Bundles
Guide to have the Configuration of RoboKit and SenseKit saved in a Bundle
Guide to have the Configuration of RoboKit and SenseKit saved in a Bundle
Streamline the setup process by creating configuration bundles. These bundles encompass your preferred settings for both RoboKits and SenseKits, allowing you to apply consistent configurations with a single click.
Bundles contain specific combinations of RoboKit, SenseKit and audio configurations, and are used to quickly and easily load or switch between configurations, instead of having to load each device one by one.
Follow along the steps to save a Bundle:
Open the Configuration tab in the wrist panel.
Press on the Bundles button.
Press on the Save Current Bundle Button, which will open the panel shown in Figure below.
Input the name of the current Bundle.
Press Save. This will save the bundle to storage so it can be loaded in the future.
The following steps will help you to load a currently saved bundle from the storage.
Open the Configuration tab in the wrist panel.
Press on the Bundles button.
Press the bundle you would like to load from the list. All the devices saved in the bundle will now be automatically loaded.
