Over-the-Air Firmware Updates
Guide to Upgrade your Firmware of RoboKit and SenseKit through AMAS
Guide to Upgrade your Firmware of RoboKit and SenseKit through AMAS
The AMAS VR application comes with the built-in functionality of updating the firmware for the designated RoboKit(s) and SenseKit(s).
You need to complete the following pages of RoboKit and SenseKit upgrade respectively before you proceed any further in this section.:
Stay up-to-date with the latest improvements and enhancements by keeping your RoboKits and SenseKits firmware updated. This section guides you through the process of performing over-the-air firmware updates for seamless device maintenance.
Start with opening the Configuration tab and go to the Settings option.
This will open the settings panel.
Select Firmware Update. This should now open the Firmware Update panel.
Fill in the Device IP, Device Port (Default: 8090) and Device Password of the device you want to update.
Select the accurate type and model of the device and then select Download Firmware. It should open the Firmware Download Panel and start the download process.
Once the download is complete, select Flash Firmware button to finish the last step of the update on the panel.
Press Exit.
Now exit the application and reboot the device that you just updated to enjoy the latest firmware.