Running the Application

Instructions for running the Application

Oculus Quest

Go through the following steps to have your application running:

1. Power on the Oculus by pressing the power button.

2. Once powered on the Oculus, follow the instructions displayed in the headset to create a Stationary Guardian Boundary with the correct floor level.

3. Connect the Oculus to the Laptop using the Link Cable (USB C to USB 3).

4. Oculus headset will prompt, “Enable Oculus Link”. Click on “Enable”. Wait for the Rift mode to load. After the loading is complete, you will be teleported into a white empty room with a panel display.

5. Launch the AMAS from the library connected to Oculus VR headset.

6. The AMAS VR application loads with the simulation / tutorial mode by default.

Quest Link Application Access

HTC Vive

Go through the following steps to have your application running:

1. Power on the Vive and Setup the peripherals.

2. Once powered on the and the staus on SteamVR shows active, follow the instructions displayed in the headset to create a Stationary Guardian Boundary with the correct floor level.

3. After the loading is complete, you will be teleported into a white empty room with a panel display.

4. Launch the AMAS from the Library in the laptop connected to Oculus VR headset.

5. The AMAS VR application loads with the simulation / tutorial mode by default.