User Guide
v7.0
v7.0v7.3v7.4v7.6v8.3v9.3v10.3
v7.0
v7.0v7.3v7.4v7.6v8.3v9.3v10.3
  • Extend Robotics Documentation
  • getting started
    • Getting Started with AMAS
    • Downloads
      • OTA
      • Calibration Board
      • API
        • Gripper Control Message
        • Arm Control Message
        • Arm Response Message
        • Robot Message
        • Safety Mode Message
        • Set Int Service File
        • Get Err Service File
        • Get Program State Service File
    • Navigating Through the User Guide
  • introduction
    • AMAS Overview
    • Compatible XR Systems
    • Typical Network Connection
    • Specifications
  • AMAS VR Application
    • Introduction
    • Instructions
      • The User Experience
        • Accessing and Running the Application
          • Setup Oculus Application and AMAS
          • Running the Application
        • Home Scene Arrival
        • Selecting Experiences
      • The Interaction
        • View Adjust Mode
        • Robot Control Mode
        • The Bottom Panel
      • The Configuration
        • RoboKit Addition and Configuration
        • Loading RoboKit
        • SenseKit Addition and Configuration
        • Loading SenseKit
        • Configuration Bundles
        • RoboKit Calibration
          • Manual RoboKit Calibration
          • Force Torque Calibration
        • SenseKit Calibration
          • SenseKit to Robot Calibration
          • SenseKit to SenseKit Calibration
          • Manual Calibration
        • Over-the-Air Firmware Updates
        • Robot Rescue
        • Shutdown Instructions
  • SenseKit
    • Introduction
    • Components
      • Pre-requisite SenseKit Components
      • Shipped SenseKit Components
    • Instructions
      • Mounting Options
      • Setup Instructions
      • Running Instructions
      • SenseKit IP Configuration
      • Calibration Instructions
      • SenseKit Firmware Upgrade / Install Instructions
      • Shutdown Instructions
  • RoboKit
    • Introduction
    • Components
      • Pre-requisite RoboKit Components
      • Shipped RoboKit Components
    • Instructions
      • Initial Setup Instructions
      • Instructions for Starting RoboKit
      • RoboKit IP Configuration
      • RoboKit Firmware Upgrade / Install Instructions
      • Shutdown Instructions
    • Safety Protocols
  • API
    • RoboKit
      • Current Robokit Publishers, Subscribers and Services
      • Gripper Customizations
    • SenseKit
  • Other Information
    • Troubleshooting and Logs Gathering
    • Customized Hardware Integrations
    • Remote Demonstration Requirements
Powered by GitBook
On this page
  1. getting started
  2. Downloads
  3. API

Get Err Service File

Get Err Downloadable Content

PreviousSet Int Service FileNextGet Program State Service File
40B
GetErr.srv