RoboKit IP Configuration

Guide to have a custom IP for the RoboKit.

The RoboKit comes with a default IP for communication to AMAS VR app which the user needs to give network access to by configuring the router. To change the IP on the RoboKit follow the instructions below:

  1. Connect the RoboKit to a monitor using the HDMI port on the RoboKit.

  2. Connect a Keyboard and Mouse to the RoboKit using the USB ports available on the RoboKit.

  3. Power On the RoboKit.

  4. Logon to the user and provide password extend

  5. Then follow the steps mentioned on the website URL: (https://linuxhint.com/static_ip_ubuntu/) to configure the Static IP or change to dynamic IP as needed.Then follow the steps mentioned on the website URL: (https://linuxhint.com/static_ip_ubuntu/) to configure the Static IP or change to dynamic IP as needed.

  6. Remember the New IP as that would be needed in the AMAS VR app for connecting to the RoboKit.