Robot Rescue
Guide to Robot Rescue Feature
Guide to Robot Rescue Feature
While we have designed the AMAS experience with salient features of Singularity Avoidance, Collision Detection and Easy Rescue. We have still made sure to add a dedicated feature of robot rescue for edge case scenarios in mind where the users can take the control of the robot position in their hands!
Steer clear of the robot as the Robot will be moving automatically in the last step of this process.
Let's go over the steps doing so in the application:
In the case where the realignment of the Digital Twin is failing and you're getting an error code G0001 first go into Robot Control Mode
.
Now move the digital twin to an ideal position inside the joint limits approximately.
The robot will not move with the digital twin in this case and that is expected as it is failing realignment.
Then go in the Configuration
and select RoboKit
.
Then in the panel of Active RoboKits
just at the right of the RoboKit name beside the trash can icon you'll see a black icon.
Press on that icon and the Trajectory operations Panel will open and using a transparent digital twin the robots planned path will be visualized.
Trajectory Operations Panel is used to preview the planned motion the robot will perform to recover from the error, authorize the planned motion if the motion is acceptable or to stop the motion of the arm in case of sudden change in environment during the execution of the motion.
To re-visualize the path, in the Trajectory Operations Panel
press the Visualize Robots Planned Motion
button to preview the motion the arm will make.
In case the planned motion is not acceptable then click Cancel
button and move the digital twin to a different position and press the robot rescue icon again. This step could be repeated as many times till a suitable path is found.
Upon finding the suitable path press the Execute Planned Motion
, when the execution is completed the Operation Status
would indicate the state.
Now press Cancel
to return to the Active Robokits
panel. Robot Rescue is now finished and robot is ready to use.
Note : In case of sudden change in the environment or some other reason the robot needs to be stopped while the executing the planned path, press the Stop Planned Motion Execution
button in the Trajectory Operations Panel
. The robot will stop, then to complete the robot rescue, click Cancel
and then click on the Robot Rescue button then perform the Steps 6-9