Running the Application

Instructions for running the Application

Meta Quest

Follow the steps below to get the application running:

1. Power on the Oculus by pressing the power button.

2. Once powered on the Oculus, follow the instructions displayed in the headset to create a Stationary Guardian Boundary with the correct floor level.

3. Connect the Oculus to the Laptop using the Link Cable (USB C to USB 3).

4. Make sure OpenXR runtime is set for Quest/Oculus
5. Oculus headset will prompt, “Enable Oculus Link”. Click on “Enable”. Wait for the Rift mode to load. After the loading is complete, you will be teleported into an empty white room with a panel display.

6. Launch the AMAS from the application library.

7. The AMAS VR application will load in the tutorial mode by default.

Quest Link Application Access

HTC Vive

Go through the following steps to have your application running:

1. Power on the Vive and set up the peripherals.

2. Once powered on and the status on SteamVR shows as active, follow the instructions displayed in the headset to create a Stationary Guardian Boundary with the correct floor level.

3. Choose the OpenXR runtime for steam following https://www.vive.com/uk/support/vs/category_howto/trouble-with-openxr-titles.html

4. After the loading is complete, you will be teleported into an empty white room with a panel display.

5. Launch the AMAS from the application library.

6. The AMAS VR application will load with the tutorial mode by default.