User Manual

Getting Started with AMAS

Embracing the world of virtual reality robotics through the AMAS VR Application
This section guides you through the initial steps, ensuring a smooth transition from curiosity to active engagement.

AMAS Complete Solution Setup

To Setup the Complete Solution Follow along the following Steps:
  1. 1.
    Components Check for RoboKit: Components
  2. 2.
    Components Check for SenseKit: Components
  3. 3.
    Network Setup: Typical Network Connection
  4. 4.
    Setting up the RoboKit: Initial Setup Instructions
  5. 5.
    Setting up the SenseKit: Setup Instructions
  6. 6.
    Running the RoboKit: Instructions for Starting RoboKit
  7. 7.
    Running the SenseKit: Running Instructions
  8. 8.
    AMAS Setup and Running: Accessing and Running the Application
After this follow along the user guide for specific steps inside the application. You can find some help regarding the user guide here: Navigating Through the User Guide.
  1. 9.
    AMAS Shutdown: Shutdown Instructions
  2. 10.
    SenseKit Shutdown: Shutdown Instructions
  3. 11.
    RoboKit Shutdown: Shutdown Instructions